Brel 35 mm remote controlled tubular motor for roller shutters and awnings

This tubular motor is no longer available, see the Brel MR35 tubular motor as an alternative

Brel roller shutter motor with a strength of 6 or 10 Nm. Ideal for making your manually operated Roller shutter electric and remote controlled. This tubular motor fits into the small 40 mm Axle/Shaft with which most manually operated roller shutters are equipped.

- Supplied without motor support and adapter set
- roller shutter motor with electronic final adjustment
- with integrated receiver
- pulse and touch control
- intermediate position
- obstacle stop function
- no special springs required
- tubular motor has a diameter of Ø 35 mm
- suitable for Roller shutters with an Axle/Shaft of at least 40 mm
- available in 6 Nm at 28 rpm and 10 Nm at 17 rpm
- power supply 230 Volt

------------

All Brel motors with an integrated receiver can be controlled with the following Apps from anywhere in the world (as long as you are connected...).

- Lite Smartsware Controller
All you need for this is the Lite plug. This connects
to your router and you're good to go.
It allows you to control all your Brel radio motors and also switch on timers.

- HomeWizard
For this, you need the HomeWizard box. The App then offers the opportunity to
programming scenarios, deploying actions depending on Sensor input.
So if it gets warmer than 20 degrees inside, during the day the Roller shutters
down etc.

- Homey Athom
The magic orb. Responds to any verbal command. Combines various apps.
For example, when buienradar indicates that it will rain in your area,
then the sunshade goes inside.

You can find the apps for the above controls in the App store or the Google Play store.