Brel MR45 mono-directional tubular motor for roller shutters and blinds

Brel does not manufacture 45 mm tubular motors with an integrated mono-directional receiver, you can order the Brel 45 mm tubular motor with a bi-directional receiver for this as an alternative, please note that a bi-directional remote control for control is also required.

- Supplied without motor support and adapter set
- tubular motor has mechanical final adjustment
- Motor is equipped with an integrated receiver
- the mono-directional receiver only works with a mono-directional transmitter
- tubular motor has a diameter of Ø 45 mm
- suitable for Roller shutters with an Axle/Shaft of at least 50 mm
- since May 2023 only available in 40 Nm for a limited time only
- speed 15 rpm
- Motor length 20 Nm is 612 mm, 40 mm is 643 mm
- power supply 230 Volt

------------

All Brel motors with an integrated receiver can be controlled with the following Apps, from anywhere in the world (as long as you are connected...).

- Brel Home
Since 2019, Brel has had its own app, the Brel Home. This is specially geared to Brel
motorisation and also prepared for two-way communication. The app can also be linked
to voice control from Amazon Alexa or Google Home.

- Lite Smartsware Controller
All you need for this is the Lite plug. This connects
to your router and you're good to go.
It allows you to control all your Brel radio motors and also turn on timers.

- HomeWizard
For this, you need the HomeWizard box. The App then offers the opportunity to
to programme scenarios, to deploy actions depending on the input of sensors.
So if it gets warmer than 20 degrees inside, during the day the Roller shutters
down etc.

- Homey Athom
The magic orb. Responds to any verbal command. Combines various apps.
For example, when rainfall radar indicates that it will rain in your area,
then the sunshade goes inside.

You can find the apps for the above controls in the App store or the Google Play store.

Back to all Roller shutter and tubular motors >>