Remote control Somfy Telis 1 RTS

This Handheld transmitter is no longer available, see the Somfy Situo 1 RTS as a replacement

- can be used with a product equipped with RTS receiver
- 1-channel transmitter with RTS technology
- wireless operation
- easy to program.
- pulse operation (one button press).
- colour white
- wall mounting with wall bracket
- battery and wall bracket supplied as standard

Setting an additional Somfy RTS transmitter using an already functioning transmitter
1. take an already programmed Somfy RTS transmitter
2. press the rear programming button until the Roller shutter responds with a short movement
3. Take the new Somfy RTS transmitter
4. press the programming button on the back until the roller shutter responds with a short movement
5. the new Somfy Situo 1 RTS Pure II transmitter is set up

Replacing a lost Somfy RTS transmitter
only one motor may be powered
1. switch off the power supply for 2 seconds
2. switch on the power supply for 8 seconds
3. switch off the power supply again for 2 seconds
4. switch on the power supply again
Motor responds with a short movement
6. Press the programming button on the back of the transmitter briefly
7. the Roller shutter responds with a short movement
8. the new Somfy Telis 1 RTS transmitter is set